Double-Sided Anti-Collision Wall Board 08 | SMFZB880-08
Add a large-format double-sided board to your interior-material range. OUZHAI SMFZB880-08 is listed at 880 × 2800 × 8 mm under the double-sided anti-collision board name. Request a labeled sample and current construction details for your customers or project.
- 880 × 2800 × 8 mm nominal size
- Double-sided board
- Request model-specific construction and test information
On this page
A Double-Sided Board for Your Interior Range
For distributors and interior-material brands, SMFZB880-08 offers an 880 mm-wide format to discuss with customers planning broad interior wall surfaces. Ask for a model-labeled board sample that shows both faces and the cut edge. Your sales team can use it to explain the actual finish and construction offered, rather than relying on a family photograph.
Send your target market, preferred finish, estimated quantity and destination. If your buyers have a defined impact requirement or need particular documents, include the relevant test method and acceptance criteria in the inquiry. OUZHAI can then identify the information available for the selected model.
Production and Construction
OUZHAI range information describes more than one double-sided board construction. Request the current SMFZB880-08 section drawing to confirm the layers, their materials and thicknesses. The family description should be checked against the actual board offered for your order.
OUZHAI describes production checks, surface finishing and a review of finished boards on its manufacturing and quality page. Ask which production operations apply to this exact model, and approve the face, edge and finish on a labeled sample before placing a bulk order. Confirm any requested processing or special length in the quotation.
Quality Review for Your Order
The factory quality page describes checks on board dimensions and appearance. For SMFZB880-08, discuss the model-specific inspection points, acceptable variation and reference sample for both faces and the finished edge. Keep the approved model and finish codes with your order documents.
The anti-collision name identifies the product; it does not state a measured impact rating. If your customer specifies an impact test, request the report for the exact model and review the test method, result and specimen conditions. A finished wall’s response also depends on its installation and support.
Packing and Wholesale Requirements
Request the package dimensions, boards per pack, gross weight and protection for both faces and edges. OUZHAI describes protecting and grouping boards for dispatch and checking labels and quantities. Confirm the packed dimensions and whether they fit your warehouse, lift, doorways and turning route. The 2800 mm panel length remains important even with the narrower face.
Include the model, finish, quantity, destination and any labeling requirements in your request. Ask the quotation to identify the offered construction, packing and delivery terms. Confirm minimum order, availability and production schedule for the actual purchase.
SMFZB880-08 Specifications
| Model | SMFZB880-08 |
|---|---|
| Product name | Double-Sided Anti-Collision Board 08 |
| Nominal finished size | 880 × 2800 × 8 mm |
| Construction | Double-sided board; exact layers require model-specific confirmation |
| Finish, tolerance and current supply | Confirm for the order |
| Impact performance | Request the relevant model-specific test report. |
Plan a Large-Format Wall
The listed 880 mm width provides a narrower starting module than a 1220 mm board. It creates more joints across the same wall width; confirm actual coverage before calculating quantities. Draw the wall with doors, outlets, corners and returns in place, then locate the board joints and cuts. For a corridor or other area where contact is expected, explain the type of use and any specified performance criteria to the project team.
Review a physical sample beside door frames, trim and adjacent finishes. Inspect both faces and an exposed edge; ask which edge treatment and installation detail are available for the selected board. Confirm current dimensions and effective layout details before producing a cutting schedule.
Compare Related Board Models
SMFZB880-08 is listed at 880 × 2800 × 8 mm, while SFZB1220-08 is listed at 1220 × 2800 × 8 mm. The narrower board changes joint spacing; verify packed dimensions and turning clearances when planning access. Ask for separate labeled samples and technical sheets when comparing these models. Do not assume the same layer construction, finish or test result applies across model codes.
Frequently Asked Questions
What size is SMFZB880-08?
The supplied product list records a nominal finished size of 880 × 2800 × 8 mm. Confirm current supply dimensions and tolerances before ordering.
What does double-sided mean for this model?
The product is named as a double-sided board. Request a model-specific section drawing and sample to verify the materials and thicknesses of each layer.
Is there an impact rating?
If a rating is required, provide the test method and request the applicable report for SMFZB880-08. The product name alone does not establish a test result.
What should I send for a wholesale quote?
Provide the model, desired finish, quantities, destination, packing requirements and any technical documents your customers require.
Request SMFZB880-08 Samples and a Quote
Share your finish, quantity and destination with OUZHAI. Ask for a section drawing and the documents needed for your application.
