400 mm Double-Rib V-Seam WPC Wall Panel | SJ-08V400
Give your customers a narrower V-seam panel for interiors where the joint is part of the design. OUZHAI SJ-08V400 is listed at 400 × 2800 × 8 mm, with a double-rib bamboo-wood fiber profile. Contact us for a sample and current wholesale quotation.
- 400 mm nominal width
- 2800 mm listed length
- 8 mm nominal thickness
- Double-rib V-seam profile
On this page
A 400 mm V-Seam Panel for Your Product Range
For wall panel distributors and interior-material brands, SJ-08V400 adds a narrower module to a V-seam assortment. The 400 mm width creates a more frequent joint rhythm across a wall than a 600 mm nominal module. This gives your customer another visual choice when presenting a feature wall or a series of shorter wall sections.
Ask OUZHAI for an SJ-08V400 sample, available finish references and a quotation for your destination. If you also stock a 600 mm profile, show the two widths together so customers can compare how often the V-seam appears. Confirm the current supply combinations, packing and any branding requirements for your order.
Production from Profile to Decorative Surface
OUZHAI describes a manufacturing flow that begins with material mixing and extrusion, followed by cooling and cutting the formed profile. The profile is inspected before surface finishing. Decorative surfaces are applied in the finishing process, and finished boards are reviewed before packing.
For SJ-08V400, request a current model-specific section drawing and a finished sample showing the face and joint. These make it easier to communicate the 400 mm profile and selected finish to your purchasing and sales teams. If you require a different length or a specific finish, include it in your inquiry and confirm what is available for this model.
Quality Checks and Order Consistency
The OUZHAI manufacturing and quality page describes checks on density, thickness and appearance during production, followed by review of finished dimensions and surfaces. Discuss the inspection points and acceptance criteria for your SJ-08V400 order, including the profile, visible surface and finish reference.
Keep the approved sample with its model and finish code. For repeat orders, use the same written specification when discussing the finish and product configuration. If your customer requires a performance report, provide the applicable requirement and request evidence for the exact offered product and installation.
Packing and Wholesale Inquiry
OUZHAI describes protecting and grouping boards for dispatch, with a pack check covering labels, protection and quantities. Ask for the current package dimensions, pieces per pack and weight for SJ-08V400 so you can plan freight and warehouse handling.
Send the destination, quantity by finish, preferred packaging or label requirements, and expected order schedule. The quotation can then identify the product, quantity basis, packing and delivery terms. Confirm any customization, minimum order and lead time for the actual purchase.
SJ-08V400 Specifications
| Model | SJ-08V400 |
|---|---|
| Type | Double-rib V-seam bamboo-wood fiber WPC wall panel |
| Nominal finished size | 400 × 2800 × 8 mm |
| Joint appearance | V-seam |
| Finish and supply options | Confirm for the order |
| Dimensions are nominal; request the section drawing for coverage and tolerances. | |
Choose the Joint Rhythm for Your Wall
A 400 mm panel divides a wall into narrower visual intervals than a 600 mm panel. In a corridor with several doors, those intervals affect where seams meet frames and short returns. Draw the elevation with the openings shown, then compare a layout beginning at the door with one centered on the wall. Check the effective coverage on the current section drawing before using the layout to calculate a final quantity.
A joined sample shows the V-shaped connection as well as the face finish. Review it under the room lighting and beside the door frame or adjacent surface. For a distributor display, include the visible joint so the buyer can understand how several panels look together.
Compare SJ-08V400 and SJ-08V600
Both are listed at 8 mm nominal thickness and 2800 mm length. SJ-08V400 is 400 mm wide; SJ-08V600 is 600 mm wide. Choose the module with the seam spacing that suits the elevation or the assortment you intend to sell. Request separate samples and drawings: the available source does not establish that their profiles, trims or finishes are interchangeable.
Plan the Complete Installation
Show the ceiling and floor edges, corners, door reveals and outlets on the drawing. Tell OUZHAI and the installer about the substrate and intended location, and request the current installation detail and compatible edge components for SJ-08V400. A small mock-up with a joint and a corner helps the project team review the finished appearance before the full wall is installed.
Frequently Asked Questions
What size is SJ-08V400?
The supplied product list records 400 × 2800 × 8 mm as the nominal finished size. Confirm the current supply length, tolerance and effective coverage before ordering.
How does it differ from SJ-08V600?
The listed thickness and length are the same, while the nominal width changes from 400 mm to 600 mm. Compare model-specific sections and finishes before substituting one for the other.
Can I request a sample for my showroom?
Contact OUZHAI with the model and preferred finish. Ask for a labeled profile and, if the seam is central to the display, a joined sample. Confirm sample availability and terms.
What should I include in a wholesale inquiry?
Send the model, desired finish, estimated quantity, destination, packaging or label requirements and required documents. Include drawings if the order is for a specific project.
Request SJ-08V400 Samples and a Quote
Share your finish, quantity and destination with OUZHAI. We can discuss the current product specification, packing and quotation for your order.
